Skip to main content

Featured Selection|695XL-F4 Gas Powerhead| Other Products

USD 954.00
Other Products / General Merchandise / Other Products
695XL Gas Saw. Powerhead only. Fits FORCE4 guidebars and diamond chains, which are available separately.

The 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder.
Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction and concrete professionals.

Product Details

Powerhead only
Use on concrete, stone, masonry, brick, block, ductile iron, cast iron, PVC, HDPE and more
Most versatile gas power cutter
Piston and cylinder lowers engine temperature
Longer life muffler with reinforced internal baffle
Easy-to-start with higher energy ignition system
Easy-to-tune carburetor
Operates FORCE4, PowerGrit and PowerGritXL diamond chain up to 20"

WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Gas Concrete Saw

Engine Type
2-stroke, single cylinder, air cooled

Displacement
5.7 cu in (94 cc)

Engine Speed Max
9,300 +/- 150 rpm (max)

Engine Speed Idle
2,700 +/- 100 rpm

Fuel Mix Ratio
50:1 (2%) fuel-to-oil

Fuel Capacity
0.26 gal (1 L)

Chainsaw

Power Type
Gas

Use Application
HDPEAsphaltDuctile IronBrickCast IronBlockConcreteMasonryPVCStoneAC Pipe

Weight, Saw Only
21 lbs (9.6 kg)

Cutting Depth
up to 20 in (50 cm)

Bar Length
12 in (30 cm)16 in (40 cm)20 in (50 cm)

Noise Level (Power) 

115 dB(A), (Kwa = 1.0 dB(A))

Chain Length
12 in (30 cm)16 in (40 cm)20 in (50 cm)

Noise Level (Pressure)
104 dB(A), (K=1.0 dB(A))

Horsepower
6.4 hp (4.8 kW)

Front Handle Vibration, ahv eq Concrete Cutting 

3.6 m/s2 (K=0.2 m/s2)

Rear Handle Vibration, ahv eq Concrete Cutting 

3.1 m/s2 (K=0.2 m/s2)

Front Handle Vibration, ahv eq Pipe Cutting 

5.62 m/s2 (K=0.2 m/s2)

Rear Handle Vibration, ahv eq Pipe Cutting 

5.28 m/s2 (K=0.2 m/s2)

Water Supply (Min)
20 psi (1.4 bar)

Water Flow Req (Min)
2 gpm (8 lpm)

General

Unit of Measure
Each
Brand:ICS OregonSKU:575826Tags:Concrete Chainsaws
View product
Product details
695XL Gas Saw. Powerhead only. Fits FORCE4 guidebars and diamond chains, which are available separately.

The 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder.
Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction and concrete professionals.

Product Details

Powerhead only
Use on concrete, stone, masonry, brick, block, ductile iron, cast iron, PVC, HDPE and more
Most versatile gas power cutter
Piston and cylinder lowers engine temperature
Longer life muffler with reinforced internal baffle
Easy-to-start with higher energy ignition system
Easy-to-tune carburetor
Operates FORCE4, PowerGrit and PowerGritXL diamond chain up to 20"

WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Gas Concrete Saw

Engine Type
2-stroke, single cylinder, air cooled

Displacement
5.7 cu in (94 cc)

Engine Speed Max
9,300 +/- 150 rpm (max)

Engine Speed Idle
2,700 +/- 100 rpm

Fuel Mix Ratio
50:1 (2%) fuel-to-oil

Fuel Capacity
0.26 gal (1 L)

Chainsaw

Power Type
Gas

Use Application
HDPEAsphaltDuctile IronBrickCast IronBlockConcreteMasonryPVCStoneAC Pipe

Weight, Saw Only
21 lbs (9.6 kg)

Cutting Depth
up to 20 in (50 cm)

Bar Length
12 in (30 cm)16 in (40 cm)20 in (50 cm)

Noise Level (Power) 

115 dB(A), (Kwa = 1.0 dB(A))

Chain Length
12 in (30 cm)16 in (40 cm)20 in (50 cm)

Noise Level (Pressure)
104 dB(A), (K=1.0 dB(A))

Horsepower
6.4 hp (4.8 kW)

Front Handle Vibration, ahv eq Concrete Cutting 

3.6 m/s2 (K=0.2 m/s2)

Rear Handle Vibration, ahv eq Concrete Cutting 

3.1 m/s2 (K=0.2 m/s2)

Front Handle Vibration, ahv eq Pipe Cutting 

5.62 m/s2 (K=0.2 m/s2)

Rear Handle Vibration, ahv eq Pipe Cutting 

5.28 m/s2 (K=0.2 m/s2)

Water Supply (Min)
20 psi (1.4 bar)

Water Flow Req (Min)
2 gpm (8 lpm)

General

Unit of Measure
Each
Brand:ICS OregonSKU:575826Tags:Concrete Chainsaws
Product information
COL-ce88de22953c9661507621b8e7c88a9f0f3b4290
Other Products / General Merchandise / Other Products
Stock and delivery

You may also like

    Other products

      Footnotes