No image available
The Personal Edit｜ Other Products ｜All Shield Wb Modified Silane-Siloxane Concrete Protectant
USD 109.66
Other Products / General Merchandise / Other Products
All Shield WB is a low-VOC, water-based concrete and stone protectant that resists oil, water, and stains on interior and exterior surfaces
All Shield WB is a synthetic-modified silane-siloxane protectant that penetrates concrete, brick, pavers, and natural or synthetic stone, bonding directly with the substrate. Rather than forming a surface film, it creates an invisible barrier that resists moisture, oil, food stains, and deicing salts while preserving the surface's natural look and breathability.
Key Features & Benefits
Excellent oil, water, and stain repellency for interior and exterior surfaces
Low-VOC formula, compliant with SCAQMD, OTC, and LADCO regulations
Long-lasting protection for both new and existing concrete and stone
Dries quickly to a tack-free, skid-resistant finish
Water-based, colorless, and non-yellowing
USDA approved for indirect food contact areas
Common Applications
Suited for commercial and industrial floors, automotive service areas, driveways, pavements, brick, concrete pavers, parking structures, bridges, and marine platforms.
Application Instructions
Apply generously with a low-pressure sprayer
Use proper respirator and ventilation during application
New concrete should cure a minimum of 21 days before application
Substrate must be clean, dry, and free of oil or other contaminants
Agitate the product well before each use
Coverage varies based on surface porosity — refer to the Technical Data Sheet or contact SpecChem for project-specific coverage guidance
Technical Data Summary
Composition: Modified fluoropolymer, silane/siloxane blend
Appearance: Water clear
Flash Point: Greater than 200°F
UV Resistance: Excellent
Shelf Life: 12 months
Packaging
Available in 1-gallon jugs (4 per case), 5-gallon pails, and 55-gallon drums.
Cleaning & Maintenance
Clean spills promptly with clean water or a pressure washer. For tougher stains, a diluted solution of SpecChem Orange Peel or Berry Clean followed by a clean water rinse is recommended.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:ASHIELD-5Tags:Cementitious Products and Liquids, SealersSize:5 Gallon, 55 Gallon
View productAll Shield WB is a synthetic-modified silane-siloxane protectant that penetrates concrete, brick, pavers, and natural or synthetic stone, bonding directly with the substrate. Rather than forming a surface film, it creates an invisible barrier that resists moisture, oil, food stains, and deicing salts while preserving the surface's natural look and breathability.
Key Features & Benefits
Excellent oil, water, and stain repellency for interior and exterior surfaces
Low-VOC formula, compliant with SCAQMD, OTC, and LADCO regulations
Long-lasting protection for both new and existing concrete and stone
Dries quickly to a tack-free, skid-resistant finish
Water-based, colorless, and non-yellowing
USDA approved for indirect food contact areas
Common Applications
Suited for commercial and industrial floors, automotive service areas, driveways, pavements, brick, concrete pavers, parking structures, bridges, and marine platforms.
Application Instructions
Apply generously with a low-pressure sprayer
Use proper respirator and ventilation during application
New concrete should cure a minimum of 21 days before application
Substrate must be clean, dry, and free of oil or other contaminants
Agitate the product well before each use
Coverage varies based on surface porosity — refer to the Technical Data Sheet or contact SpecChem for project-specific coverage guidance
Technical Data Summary
Composition: Modified fluoropolymer, silane/siloxane blend
Appearance: Water clear
Flash Point: Greater than 200°F
UV Resistance: Excellent
Shelf Life: 12 months
Packaging
Available in 1-gallon jugs (4 per case), 5-gallon pails, and 55-gallon drums.
Cleaning & Maintenance
Clean spills promptly with clean water or a pressure washer. For tougher stains, a diluted solution of SpecChem Orange Peel or Berry Clean followed by a clean water rinse is recommended.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:ASHIELD-5Tags:Cementitious Products and Liquids, SealersSize:5 Gallon, 55 Gallon
Product details
All Shield WB is a low-VOC, water-based concrete and stone protectant that resists oil, water, and stains on interior and exterior surfaces
All Shield WB is a synthetic-modified silane-siloxane protectant that penetrates concrete, brick, pavers, and natural or synthetic stone, bonding directly with the substrate. Rather than forming a surface film, it creates an invisible barrier that resists moisture, oil, food stains, and deicing salts while preserving the surface's natural look and breathability.
Key Features & Benefits
Excellent oil, water, and stain repellency for interior and exterior surfaces
Low-VOC formula, compliant with SCAQMD, OTC, and LADCO regulations
Long-lasting protection for both new and existing concrete and stone
Dries quickly to a tack-free, skid-resistant finish
Water-based, colorless, and non-yellowing
USDA approved for indirect food contact areas
Common Applications
Suited for commercial and industrial floors, automotive service areas, driveways, pavements, brick, concrete pavers, parking structures, bridges, and marine platforms.
Application Instructions
Apply generously with a low-pressure sprayer
Use proper respirator and ventilation during application
New concrete should cure a minimum of 21 days before application
Substrate must be clean, dry, and free of oil or other contaminants
Agitate the product well before each use
Coverage varies based on surface porosity — refer to the Technical Data Sheet or contact SpecChem for project-specific coverage guidance
Technical Data Summary
Composition: Modified fluoropolymer, silane/siloxane blend
Appearance: Water clear
Flash Point: Greater than 200°F
UV Resistance: Excellent
Shelf Life: 12 months
Packaging
Available in 1-gallon jugs (4 per case), 5-gallon pails, and 55-gallon drums.
Cleaning & Maintenance
Clean spills promptly with clean water or a pressure washer. For tougher stains, a diluted solution of SpecChem Orange Peel or Berry Clean followed by a clean water rinse is recommended.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:ASHIELD-5Tags:Cementitious Products and Liquids, SealersSize:5 Gallon, 55 Gallon
All Shield WB is a synthetic-modified silane-siloxane protectant that penetrates concrete, brick, pavers, and natural or synthetic stone, bonding directly with the substrate. Rather than forming a surface film, it creates an invisible barrier that resists moisture, oil, food stains, and deicing salts while preserving the surface's natural look and breathability.
Key Features & Benefits
Excellent oil, water, and stain repellency for interior and exterior surfaces
Low-VOC formula, compliant with SCAQMD, OTC, and LADCO regulations
Long-lasting protection for both new and existing concrete and stone
Dries quickly to a tack-free, skid-resistant finish
Water-based, colorless, and non-yellowing
USDA approved for indirect food contact areas
Common Applications
Suited for commercial and industrial floors, automotive service areas, driveways, pavements, brick, concrete pavers, parking structures, bridges, and marine platforms.
Application Instructions
Apply generously with a low-pressure sprayer
Use proper respirator and ventilation during application
New concrete should cure a minimum of 21 days before application
Substrate must be clean, dry, and free of oil or other contaminants
Agitate the product well before each use
Coverage varies based on surface porosity — refer to the Technical Data Sheet or contact SpecChem for project-specific coverage guidance
Technical Data Summary
Composition: Modified fluoropolymer, silane/siloxane blend
Appearance: Water clear
Flash Point: Greater than 200°F
UV Resistance: Excellent
Shelf Life: 12 months
Packaging
Available in 1-gallon jugs (4 per case), 5-gallon pails, and 55-gallon drums.
Cleaning & Maintenance
Clean spills promptly with clean water or a pressure washer. For tougher stains, a diluted solution of SpecChem Orange Peel or Berry Clean followed by a clean water rinse is recommended.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:ASHIELD-5Tags:Cementitious Products and Liquids, SealersSize:5 Gallon, 55 Gallon
Product information
COL-1662b920f325a5385a9aeee346de6798712cdf0b
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
